Camera Remote Control for Canon EOS
Camera Remote Control for Canon EOS software by ColorRiver is used for remotely control Canon EOS DSLR cameras connected to a computer by USB cable or other interface.
The program gives you full control over all camera parameters including shutter speed, aperture, ISO, flash parameters, focus parameters, color corrections and many more. After shooting the program acquires image from camera automatically and shows it on screen. You can evaluate the image and delete unsuccessful image. The program supports "LiveView" mode (can show it on additional window or second screen).
The program constantly monitors for a new connections of specified camera types. When a camera is connected to the computer the program can switch to controls for the connected camera.
Screen shots
The main window of "Camera Remote Control for Canon EOS" software:
)
Adjusting various camera's settings (capture setting, LiveView mode and LiveView capture settings):
)
)
)
Currently supported cameras list
The program can controls the following Canon's digital SLR cameras:
- EOS-1D Mark III
- EOS 40D
- EOS-1Ds Mark III
- EOS DIGITAL REBEL Xsi/450D/ Kiss X2
- EOS DIGITAL REBEL XS/ 1000D/ KISS F
- EOS 50D
- EOS 5D Mark II
- EOS Kiss X3/EOS REBEL T1i /EOS 500D
- EOS 7D
- EOS-1D Mark IV
- EOS Kiss X4/EOS REBEL T2i /EOS 550D
- EOS 60D
- EOS Kiss X5/EOS REBEL T3i /EOS 600D
- EOS Kiss X50/EOS REBEL T3 /EOS 1100D
- EOS 5D Mark III
- EOS 1D X
- EOS Kiss X6i/EOS 650D/EOS REBEL T4i
- EOS M
- EOS 6D
- EOS-1D C
- EOS Kiss X7i/EOS 700D /EOS REBEL T5i
- EOS Kiss X7/EOS 100D/EOS REBEL SL1
- EOS 70D
- EOS M2
- EOS Kiss X70/EOS 1200D/EOS REBEL T5/EOS Hi
Please note: Remote capture functions are not supported for the EOS M/EOS M2.
System requirements
Your system must meet the following minimal requirements in order to run the program properly:
- Pentium-compatible processor;
- Windows 2000/XP/Vista/7/10;
- 128 MBytes of RAM (512 MBytes recommended);
- 20 MBytes of HDD space for software; additional place for image data;